Procurar produtos Adicionar a cotação Solicitar cotação Receber Cotação
DIRECTION CHANGE CONTROL (WITH ENGINE RPM INPUT)

APN: 12951

Controlador de Mudança de Direção

The Muirhead® Directional Change Controller is designed to prevent accidents and damage to forklifts from continued directional change whilst the forklifts are moving.

The control unit will inhibit a change of machine direction unless the machine is stationary. The system does this by sensing that the forward or reverse gears have been selected whilst detecting the forklift's ground speed to check that the machine is stationary.

The system is compatible with most types of forklifts that are installed with electric shifts.

The super sense controller senses both ground speed and gear position. The unit will not allow a change in direction unless the machine is travelling below the pre-set speed. When forward is selected and the machine is moving, the operator will not be able to select reverse until the machine is below the pre-set speed programmed in the control.

Customised versions are available on request.

Adicionar a cotação

Como podemos ajudar?