Procurar produtos Adicionar a cotação Solicitar cotação Receber Cotação
CONNECTOR PLUG 6 SOCKET DEUTSCH DT06-6S

APN: 2014

Série DT Deutsch (cinza)

Deutsch DT Series of environmentally sealed connectors are designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or cab.

Where signal level circuits are installed in harsh environments, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors provide reliability and performance at the lowest cost. Thermoplastic (-55°C to + 125°C rated) housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture. The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts.

In either selection, the spring action is designed in the socket and shrouded by a stainless steel hood that provides closed entry for positive axial alignment during mating and eliminates probe damage from occurring. Contact insertion and withdrawal require no special tools and are retained in locked position by dielectric fingers, moulded as an integral part of the housing.

Secondary locks are assembled at the mating interfaces. If, by chance, the secondary locks are not properly seated during assembly, they will be pressed into locked position during the mating of the connector.

Adicionar a cotação

Como podemos ajudar?